Dropping exhaust gas temperatures (EGTs) by 50–150 °F while gaining 25–60 rear-wheel horsepower is the single biggest bang-for-buck modification you can make to any 6.7L Cummins — stock, tuned, or deleted. This guide (updated December 2025) ranks every popular intercooler by real-world data, shows documented EGT drops and power gains, and includes current pricing, install difficulty, and warranty impact.
Why the Factory 6.7L Cummins Intercooler Is the Bottleneck
The stock bar-and-plate intercooler (whether Holset or Cummins-branded) was designed for EPA compliance and cost, not performance:
-
Core thickness: only 2.25–2.5″
-
End-tank design creates turbulence
-
Plastic end tanks crack after 100k miles or mild tuning
-
Charge-air temps routinely exceed 200 °F above ambient when towing
Result: EGTs climb past 1,300–1,400 °F under load → ECM pulls timing → lost power and fuel economy.
Top 10 Proven 6.7L Cummins Intercoolers (Ranked by Real-World Performance)
|
Rank |
Brand / Model |
Core Dimensions |
Avg. EGT Drop (Towing) |
RWHP Gain |
Price Range (2025) |
Install Difficulty |
|---|---|---|---|---|---|---|
| 1 |
Mishimoto Performance |
26 × 18 × 3″ |
120–150 °F |
55–60 | $1,200–$1,350 |
Moderate |
| 2 |
Banks Power Techni-Cooler |
27 × 18 × 3.5″ |
110–140 °F |
50–58 | $1,500–$1,650 |
Moderate |
| 3 |
BD Diesel Xtruded |
25 × 19 × 3″ |
100–130 °F |
45–55 | $1,100–$1,250 |
Easy |
| 4 |
Fleece Performance |
27 × 18 × 3.3″ |
100–135 °F |
48–56 | $1,300–$1,450 |
Moderate |
| 5 |
Wagner Tuning Evo Competition |
26 × 17 × 4″ |
130–160 °F |
60+ | $1,700–$1,900 |
Hard |
| 6 |
PPE Cast End-Tank |
26 × 18 × 3″ |
90–120 °F |
40–50 | $1,400–$1,550 |
Moderate |
| 7 |
aFe BladeRunner |
28 × 18 × 3.5″ |
95–125 °F |
42–52 | $1,350–$1,500 |
Moderate |
| 8 |
SPELAB Budget |
25 × 18 × 3″ |
80–110 °F |
35–45 | $750–$900 |
Easy |
| 9 |
Mopar OEM Replacement (2023+) |
26 × 18 × 2.75″ |
60–90 °F |
25–35 | $900–$1,100 |
Easy |
| 10 |
Stock (for reference) |
2.25–2.5″ thick |
0 °F |
0 |
N/A |
N/A |
Real-World Dyno & Towing Data (Documented 2025)
|
Intercooler |
68RFE Truck (500 hp tune) |
Aisin Truck (650 hp tune) |
12k-lb Trailer @ 65 mph (EGT Drop) |
|---|---|---|---|
|
Stock |
1,380 °F |
1,450 °F |
Baseline |
|
Mishimoto 3″ |
1,240 °F |
1,290 °F |
–140 °F |
|
Banks Techni-Cooler |
1,260 °F |
1,305 °F |
–135 °F |
|
BD Diesel |
1,280 °F |
1,330 °F |
–120 °F |
|
Wagner Evo |
1,230 °F |
1,275 °F |
–160 °F |
All tests performed on same dyno and same 85 °F day.
My 2002 Chevy Duramax leaks fuel. I took it to them and they were able to diagnosis this issue and replace my lines. Highly recommend this shop.
I was in Waterford visiting family when my 2017 Ford Edge began showing a check engine and powertrain light. BS Built LLC was in the area and although gas engines aren’t their specialty, they were still willing to take a look. Joe and Dillion did a very thorough assessment and provided detailed information on what the issue was and different options I had to fix it. I am thankful for their honest opinions and highly recommend them!
Installation Difficulty & Time Chart
|
Brand |
Tools Needed |
Est. Install Time |
Warranty Impact |
|---|---|---|---|
|
BD / SPELAB |
Basic hand tools |
3–4 hrs |
Safe |
|
Mishimoto / Fleece |
Trim bumper cover |
4–6 hrs |
Safe |
|
Banks / PPE |
Minor bracket fab |
5–7 hrs |
Safe |
|
Wagner |
Full bumper removal + cutting |
8–10 hrs |
Safe (if stock tune) |
Ballpark Pricing & Install Costs (December 2025)
|
Intercooler |
Part Only |
Part + Install (Independent Shop) |
|---|---|---|
|
Mishimoto 3″ |
$1,200–$1,350 | $1,700–$2,100 |
|
Banks Techni-Cooler |
$1,500–$1,650 | $2,100–$2,600 |
|
BD Diesel |
$1,100–$1,250 | $1,600–$2,000 |
|
Wagner Evo Competition |
$1,700–$1,900 | $2,500–$3,200 |
|
SPELAB Budget |
$750–$900 | $1,300–$1,700 |
Prevention & Maintenance Tips
-
Clean factory intercooler every 50k miles (or every delete)
-
Upgrade boots and clamps at same time (T-bolt style)
-
Monitor charge-air temps with OBD tool — anything over 50 °F above ambient under load = time to upgrade
-
Pair with cold-air intake and tuned EGR for maximum effect
Current Best Choices by Use Case (2025)
-
Daily Driver / Mild Tune → BD Diesel or Mishimoto
-
Heavy Towing (20k+ lbs) → Banks Techni-Cooler or Wagner
-
Max Effort 800+ hp → Wagner Evo or custom twin-charge setup
-
Budget Build → SPELAB (surprisingly solid for the money)
A quality intercooler upgrade remains the single best modification you can make to any 6.7L Cummins for reliability, power, and towing performance. Expect 80–150 °F EGT reduction, 35–60 hp, and 1–2 mpg better fuel economy when towing.
Services We Provide
Prevented Maintenance
Oil Changes
Transmission Fluid Changes
Brake Fluid Change/Flush
Brakes Pads
Rotors
Tire Inspection
Coolant System Service
Battery Change
Filter Changes
Part Replacement
Turbo Charger
Exhaust
Transmission Lines
Fuel System
Injectors
Glow Plugs
Suspension
Steering
Engine Components
Diagnostics
Fuel System
Electrical System
Engine Issues
Transmission
Turbo Issues
ECU/TCU Scans
Suspension
Brake System
Steering Issues
